start:knowledge:3dprinting:postprocessing
This is an old revision of the document!
Post Processing
Finishing 3D Prints: How to Sand, Fill and Prime 3D Printed Parts 3D printing hack - Finishing 3D prints with less sanding required | How to sand 3D prints fast!
- Met ontspaaner langs de randen gaan
- Schuren met de hand
- Mix van aceton en houtvuller
- Opschuren
- Automotive primer er over
- Schilderen
start/knowledge/3dprinting/postprocessing.1745089915.txt.gz ยท Last modified: 2025/04/19 21:11 by florian
